欧美国产亚洲另类动漫_在线观看不卡av_91精选在线观看_日韩精品资源二区在线

Products

current position:home page>Products>Measuring Instrument>METER>

ATMOS 22 Ultrasonic Anemometer

Updated:2025-03-13

Views:3497

  • Brand: METER
  • Model: ATMOS 22
  • Description: Measuring wind has always involved tradeoffs. Cup anemometers can’t measure both wind speed and wind direction (or low wind speeds). And they're prone to malfunction since they contain moving parts. M
  • Feedback
  • WeChat

    QQ

    Online Service

Product Details

ATMOS 22 Ultrasonic Anemometer Description:

Accuracy that will blow you away

If you want accurate wind profiling, a sonic anemometer is the obvious choice. Designed with canopies in mind, the ATMOS 22 sonic anemometer registers even the lowest thresholds of wind speed (0 m/s) with the added ability to detect fine-scale variations within 0.01 m/s resolution.

Contrast the ATMOS 22’s advanced technology to a cup or propeller wind anemometer. Neither will spin if wind speed is too low. Cup anemometers also don’t indicate wind direction, unless you combine them with a wind vane. And both are prone to additional inaccuracies due to worn out moving parts. But with the ATMOS 22, you can accurately measure wind speed anywhere, every time, with total confidence.

A low-cost sonic anemometer. Yes, you heard right.

The ATMOS 22 is not only far more affordable than other sonic anemometers but also uses 100 to 1,000 times less power. Running on less than 100 uA, the ATMOS 22 frees you to make wind measurements in multiple locations without having to constantly change batteries.

The best of both worlds

The wind-tunnel-tested ATMOS 22 ultrasonic anemometer delivers the best of both worlds.It’s accurate at low wind speeds because there aren’t any moving parts that cause friction or fail. And it’s inexpensive, especially when you consider the low-energy design. Accuracy. Dependability. Affordability. You get all three with the ATMOS 22.

Wind measurement is now a breeze

The ATMOS 22 sonic anemometer was designed without moving parts, meaning there’s never any mechanical wear. No oiling or replacing bearings. And no recalibration required. Just reliability you can continue to count on.

Not only does its ultra-low power consumption make it ideal for long-term, remote installations, but its compact size makes it small enough to deploy inside canopies. And instead of having to make field visits to collect data and check sensor and system functions, you can monitor information in real time and download data using any internet-connected device by connecting the ATMOS 22 to a ZL6 data logger. Which not only saves you time, but provides worry-free operation and peace of mind.

Sounds like a smarter way to measure wind. Because it is

The precise accuracy, yet low-maintenance of sonic measurement. The low-cost of a regular anemometer, plus even lower power consumption. The ATMOS 22 ultrasonic anemometer was engineered to offer a wide range of advantages across the widest range of wind speed, all for an affordable price.

功能:

Wind speed and direction

Easy installation

No moving parts

All data transmitted over a single wire

Digital SDI-12 communication

Connect to ZL6 for data capture and management

ATMOS 22 Ultrasonic Anemometer Specification:

Measurement Specifications Horizontal Wind Speed Range:0.00-30.00m/s
Resolution:0.01 m/s
Accuracy: the greater of 0.3 m/s or 3% of measurement
Wind Gust Range:0.00-30.00m/s
Resolution:0.01 m/s
Accuracy: the greater of 0.3 m/s or 3% of measurement
Wind Direction Range:0-359°
Resolution:1°
Accuracy:±5°
Tilt Range:-90-90°
Resolution:0.1°
Accuracy:±1°
Communication Specifications Output SDI-12 communication
Data Logger Compatibility METER ZL6,Em50,and EM60 data loggers or any data acquisition systems capable of 3.6- to 15.0-VDC excitation and SDI-12 communication
Physical Specifications Dimensions Diameter:10.0 cm(3.94in)
Height:16.0 cm(6.30in)
Operating Temperature Range Minimum:-50.00°C
Maximum:60.00°C
Cable Length 5 m(standard)
75 m (maximum custom cable length)
ConnectorTypes 3.5-mm stereo plug connector or stripped and tinned wires
Electrical and Timing Characteristics Supply Voltage (VCC to GND) Minimum: 3.6 VDC continuous
Maximum:15.0 VDC continuous
NOTE:The ATMOS 22 must be continuously powered to work properly.
NOTE: For the ATMOS 22 to meet digital logic levels specified by SDI-12, it must be excited at 3.9 VDC or greater.
Digital Input Voltage(Logic High) Minimum:2.8 V
Typical: 3.6 V
Maximum:5.0 V
Digital Input Voltage(Logic Low) Minimum:-0.3V
Typical:0.0 V
Maximum:0.8 V
Digital Output Voltage(Logic High) Typical: 3.6 V
NOTE: For the ATMOS 22 to meet digital logic levels specified by SDI-12, it must be excited at 3.9 VDC or greater.
Power Line Slew Rate Minimum:1.0 V/ms
Current Drain (During Measurement) Minimum:0.2 mA
Typical:8.0 mA
Maximum:33.0 mA
Current Drain (While Asleep) Minimum:0.2 mA
Typical:0.3 mA
Maximum:0.4 mA
Power Up Time(SDI Ready)-other commands Typical:130 ms
Power Up Time(SDI Ready)-aRx! commands Typical:10 s
Power Up Time(SDI-12, DDI Disabled) Typical: 200 ms
Measurement Duration Typical:110 ms
Maximum:3000 ms
Other Compliance Manufactured under IS0 9001:2015
EM ISO/IEC 17050:2010 (CE Mark)

WeChat

Customer Service QQ

Customer Hotline:

010-52867770
0l0-52867771
l3811111452
l7896OO5796

Technical Supports

0l0-52867774
l7896OO5796
info@m.jidi9.com
主站蜘蛛池模板: 一区二区免费在线观看| 国产不卡在线观看| 日韩免费黄色av| 精品国产一区二区三区在线观看 | 国产日韩欧美中文| 日韩无套无码精品| 99久久久精品视频| 国产精品中文久久久久久久| 欧美国产综合视频| 琪琪亚洲精品午夜在线| 日本一区二区三区四区在线观看| 高清视频一区| 国产精品久在线观看| 国产精品免费在线免费| 国产一区二区精品免费| 久久国产精品免费视频| 久久精品99| 国产中文欧美精品| 久久国产精品亚洲va麻豆| 欧美极品日韩| 国模精品一区二区三区| 好吊色欧美一区二区三区| 精品国产中文字幕| 国产精品日韩精品| 国产精品视频区1| 国产高潮呻吟久久久| 国产精品99久久久久久人| 成人h视频在线观看| 97精品在线观看| 亚洲欧洲久久| 亚洲一区二区三区免费观看 | 国产一区亚洲二区三区| 国产又粗又长又爽视频| 国产日韩欧美影视| 国产精品一区二区性色av| 国产精品入口尤物| www..com日韩| 亚洲人成网站在线播放2019| 日韩久久不卡| 久久国产精品一区二区三区| 国产日韩精品在线|